Square Spinner combines a round and a square spinner for some special effects

• 200 nodes, 250 notes or 450 nodes designed for 12mm bullets
• 3 sizes
• • Small 410mm x 410mm
  • Medium 510mm x 510mm
  • Large 775mm x 775mm
• Made from 10mm heavy-duty white or black coro
• Incorporates a traditional round spinner and concentric circles.
• Designed, manufactured and shipped in AUSTRALIA
• Download our xLights xmodel HERE
• Check out our Scratch and Dent section HERE

Where are the LEDs?

The types of lamps used in Christmas lighting also vary considerably, reflecting the diversity of modern lighting technology in general. Common lamp types are incandescent light bulbs and now light-emitting diodes (LEDs), which are being increasingly encouraged as being more energy efficient. Less common are neon lamp sets. Fluorescent lamp sets were produced for a limited time by Sylvania in the mid-1940s. Our Square Spinner is made to hold 12mm LED Smart Programmable bulbs.

Christmas lights using incandescent bulbs are somewhat notorious for being difficult to troubleshoot and repair. In the 1950s and 1960s, the series circuit-connected light sets would go completely dark when a single bulb failed. So in the fairly recent past, the mini-lights have come with shunts to allow a set to continue to operate with a burned-out bulb. However, if there are multiple bulb failures or a shunt is bad, the string can still fail. There are two basic ways to troubleshoot this: a one-by-one replacement with a known good bulb, or by using a test light to find out where the voltage gets interrupted.

Needing Inspiration

When Christmas light manufacturers first started using LEDs the colors seemed very dull and uninspiring. Even the white lights, which were typically single-chip LEDs, glowed with a faintly yellowish colour that made them look cheap and unattractive according to the general public at the time.

Be Impressed

With the help of Christmas Props Australia and some clever software like xLights, making an amazing christmas Lights Show has never been easier. Including our Square Spinner in your show will help amaze your family, your street, your whole neighbourhood and possibly the world.

The post Square Spinner appeared first on Christmas Props Australia.

The post Impression Frost Age appeared first on Christmas Props Australia.

• Waking Ghosts is approx. 1133mm High and 1004mm Wide
• Material – 10mm heavy duty white or black coroflute.
• Print is UV stable, too suit Australian conditions.
• Wiring diagram available
• Can be Supplied without holes if Required
• Designed and Manufactured in AUSTRALIA

The post Walking Ghost appeared first on Christmas Props Australia.

(Cost is currently applied on the page where the prop is selected)

Recommend that this be changed to add the cost to each print on this page. This will help people who would add a black or white prop and then add a print, thinking they get it cheaper.

The post Choose a Print appeared first on Christmas Props Australia.

• Snazzlepop is approx. 1128mm (44″) in diameter
• Material comes in 10mm thick in either white, black and Impression
• Comes with a wiring diagram
• Designed and Manufactured in AUSTRALIA

The post Snazzlepop appeared first on Christmas Props Australia.

The post Twinkly Frankie’s Angel Wings appeared first on Christmas Props Australia.

• This is a 129 node CoroFlake G designed for 12mm bullet pixels
• Small – Measures approx 584mm tall
• Material is 10mm heavy duty white Coroflute
• Designed in the USA. Manufactured in AUSTRALIA

The post Flake G On Sale appeared first on Christmas Props Australia.

• This is a 221 node Magic Castle designed for 12mm bullet pixels or Mini Lights
• Measures approx 1219mm (48″) tall and 977mm (38.5″) wide
• Material is 10mm heavy duty white coroplast w/uv print
• Designed in the USA. Printed and Manufactured in AUSTRALIA

The post IMPRESSION Magic Castle On Sale appeared first on Christmas Props Australia.

• Measures approximately 2390mm (94″) tall and 1016mm (40″) wide
• Material is 10mm heavy-duty coroplast
• Impression print is UV-tolerant
• An optional wiring diagram is available
• Cut in half and slit for shipping – backer plate included
• An email requesting the prop to be Un-Slit for shipping must be sent immediately following your order
• A separate invoice will be sent for shipping costs.
• Designed in the USA. Printed and manufactured in AUSTRALIA.

Pumpkins have spread worldwide to become the ultimate symbol of Halloween. Originally, people in Ireland and Scotland carved scary faces into turnips to create “jack-o’-lanterns” that would ward off evil spirits. When immigrants came to America, they discovered pumpkins that were bigger, brighter, and much easier to carve. Because of when pumpkins are harvested, they quickly became the perfect fit for Halloween displays. Today, carved pumpkin jack-o’-lanterns light up porches everywhere, bringing together the spooky and festive spirit of Halloween. We created the Singing Pumpkin Stack to take all the hard work out of carving a pumpkin. Make your Halloween Display dazzle your audience.

Here’s the breakdown:

1. Harvest Symbol
   Pumpkins are native to North America and ripen in autumn, making them the perfect symbol of the fall harvest. Their abundance in October naturally tied them to seasonal festivals.

2. Jack-o’-Lantern Tradition
   The practice of carving faces into vegetables came from Ireland and Scotland. People carved turnips, beets, or potatoes into lanterns to ward off evil spirits, inspired by the legend of “Stingy Jack,” a trickster doomed to roam the earth. When immigrants came to America, they found pumpkins—larger, softer, and easier to carve—so the pumpkin became the new jack-o’-lantern. Rather than carve a pumpkin, our Singing Pumpkin Stack is ready to use, year after year.

3. Scary (and Fun) Decoration
   Carved pumpkins with glowing candles inside became spooky nighttime displays, perfect for Halloween’s theme of blending the eerie with the playful.

4. Cultural Icon
   Over time, pumpkins became inseparable from Halloween marketing, movies, and folklore. Today, they’re both decorative (porch displays, pumpkin patches) and symbolic (representing autumn and Halloween itself).

👉 In short: pumpkins are used in Halloween displays because they’re seasonal, practical for carving, and rooted in folklore that merged with Halloween traditions.

Look for xLights timing tracks click here to help bring your Singing Pumpkin Stack to life quickly.

Check out our other Halloween props here

The post Singing Pumpkin Stack appeared first on Christmas Props Australia.