Choose your Heeler:

• Banjo — 696mm high x 479mm wide (approx.), 235 nodes
• Matilda — 649mm high x 421mm wide (approx.), 174 nodes
• Sheila — 1035mm high x 596mm wide (approx.), 280 nodes
• Drover — 1108mm high x 604mm wide (approx.), 341 nodes

Each design is cut from 10mm corflute and available in white or black. An optional wiring diagram is available to guide your pixel installation. The Heeler Mob is designed and manufactured in Australia.

The post The Heeler Mob appeared first on Christmas Props Australia.

• Rescue Chopper Cockapoo (Skye) 1000mm High and 857mm Wide Approx. with 450 Nodes
• Firies Dalmatian (Marshall) 856mm High and 574mm Wide Approx. with 397 Nodes
• Police German Shepherd (Chase) 875mm High and 542mm Wide Approx. with 353 Nodes
• Tradie Bulldog (Rubble) 894mm High and 628mm Wide Approx. with 407 Nodes
• Bush Mechanic (Rocky) 1079mm High and 770mm Wide Approx. with 488 Nodes
• Material comes in 10mm thick in either white or black coroflute
• Optional wiring diagram Available
• Designed and Manufactured in AUSTRALIA

Not affiliated with or endorsed by Spin Master or Nickelodeon.

The post Aussie Rescue Pups appeared first on Christmas Props Australia.

• Spider is approx. 515mm long and 445mm wide
• Material comes in 10mm thick in either white or black coroflute
• Optional printed wiring diagram
• Designed and Manufactured in AUSTRALIA

The post Spider appeared first on Christmas Props Australia.

• Octocstar 500 is approx. 635mm in diameter
• Material comes in 10mm thick in either white or black coroflute
• Optional printed wiring diagram
• Designed and Manufactured in AUSTRALIA

The post Octostar 500 appeared first on Christmas Props Australia.

Square Spinner combines a round and a square spinner for some special effects

• 200 nodes, 250 notes or 450 nodes designed for 12mm bullets
• 3 sizes
• • Small 410mm x 410mm
  • Medium 510mm x 510mm
  • Large 775mm x 775mm
• Made from 10mm heavy-duty white or black coro
• Incorporates a traditional round spinner and concentric circles.
• Designed, manufactured and shipped in AUSTRALIA
• Download our xLights xmodel HERE
• Check out our Scratch and Dent section HERE

Where are the LEDs?

The types of lamps used in Christmas lighting also vary considerably, reflecting the diversity of modern lighting technology in general. Common lamp types are incandescent light bulbs and now light-emitting diodes (LEDs), which are being increasingly encouraged as being more energy efficient. Less common are neon lamp sets. Fluorescent lamp sets were produced for a limited time by Sylvania in the mid-1940s. Our Square Spinner is made to hold 12mm LED Smart Programmable bulbs.

Christmas lights using incandescent bulbs are somewhat notorious for being difficult to troubleshoot and repair. In the 1950s and 1960s, the series circuit-connected light sets would go completely dark when a single bulb failed. So in the fairly recent past, the mini-lights have come with shunts to allow a set to continue to operate with a burned-out bulb. However, if there are multiple bulb failures or a shunt is bad, the string can still fail. There are two basic ways to troubleshoot this: a one-by-one replacement with a known good bulb, or by using a test light to find out where the voltage gets interrupted.

Needing Inspiration

When Christmas light manufacturers first started using LEDs the colors seemed very dull and uninspiring. Even the white lights, which were typically single-chip LEDs, glowed with a faintly yellowish colour that made them look cheap and unattractive according to the general public at the time.

Be Impressed

With the help of Christmas Props Australia and some clever software like xLights, making an amazing christmas Lights Show has never been easier. Including our Square Spinner in your show will help amaze your family, your street, your whole neighbourhood and possibly the world.

The post Square Spinner appeared first on Christmas Props Australia.

• Waking Ghosts is approx. 1133mm High and 1004mm Wide
• Material – 10mm heavy duty white or black coroflute.
• Print is UV stable, too suit Australian conditions.
• Wiring diagram available
• Can be Supplied without holes if Required
• Designed and Manufactured in AUSTRALIA

The post Walking Ghost appeared first on Christmas Props Australia.

• Snazzlepop is approx. 1128mm (44″) in diameter
• Material comes in 10mm thick in either white, black and Impression
• Comes with a wiring diagram
• Designed and Manufactured in AUSTRALIA

The post Snazzlepop appeared first on Christmas Props Australia.

• Archers are approx. 1347mm long and 695mm high
• Love has 541 nodes
• Hope has 541 nodes
• Peace has 555 nodes
• Joy has 499 nodes
• Material is 10mm Heavy-Duty White or Black Coroflute
• Print is UV stable to suit Australian conditions.
• Comes with a wiring diagram
• Slit for shipping must be requested in a follow up Email, and a separate invoice will be sent for shipping costs.
• Designed and Manufactured in AUSTRALIA
• Video courtesy of Lindsay Robinson

The post Hope Joy Love Peace Arch appeared first on Christmas Props Australia.

• • Measures approximately 1200mm tall and 1155mm wide
  • Material is 10mm Heavy-Duty White Coroflute
  • Print is UV stable to suit Australian conditions.
  •  Printed and Manufactured in AUSTRALIA

The post Impression CPA- Snow Globe appeared first on Christmas Props Australia.

• Small – 50 node : 520mm high and 270 mm wide (3 pixels wide)
• Medium – 100 node : 870mm  high and 140mm wide (4 pixels wide)
• Large High Density – 300 node : 1635mm high and 240mm wide (7 pixels wide) (Slit for Shipping)
• Check out our High Density Prop on YouTube
• Material is 10mm Heavy-Duty White or Black Corflute
• Prop is UV stable to suit Australian conditions
• Un-Slit for shipping must be requested in a follow-up Email for the Large Candy Cane and a separate invoice will be sent for shipping costs.
• Designed, Manufactured and Shipped in Australia Candy Cane Christmas Display

Candy Canes: Affordable Outdoor Christmas Props for DIY Holiday Magic
Add timeless charm to your festive display with our weather-resistant Candy Canes, the perfect blend of affordability and durability for Aussie and NZ holiday setups. Crafted from 10mm corflute, these affordable outdoor Christmas props can feature vibrant stripes. See our Printed range of Candy Canes.  Ideal for DIY holiday light displays in gardens, driveways, or public spaces. Whether you’re lining a Brisbane footpath, framing an Auckland porch, or creating a festive maze for a Melbourne community event, these easy-to-install motifs withstand summer storms and UV glare while adding pops of classic red-and-white cheer.

Perfect for hands-on decorators, our Candy Canes are a DIY enthusiast’s dream. Pair them with synchronised RGB lighting for dynamic holiday shows, or cluster them around pre-lit trees for instant impact. Their lightweight design allows for creative arrangements, cluster them as borders, or mix them with bulk Christmas decorations like snowflakes and stars for themed displays. Teachers and event planners love our wholesale pricing, making these candy canes a cost-effective choice for school pageants, shopping centre installations, or suburban street competitions.

Why choose our Candy Canes? They’re Aussie-made for harsh climates, resisting warping and fading even in Adelaide’s heat or Wellington’s coastal winds. Available in single pieces or bulk packs, they’re a versatile, budget-friendly solution for families, councils, and businesses. Personalise them with glitter accents or oversized scales for acreage properties, and enjoy hassle-free storage with stackable designs. From Perth backyard parties to Christchurch holiday markets, these easy-to-love props deliver festive flair without the fuss.

Shop now to transform your space with Candy Canes that marry tradition with toughness—perfect for DIY magic or bulk holiday brilliance!

The post Candy Cane appeared first on Christmas Props Australia.